#1

Hot Tapping Machine With Special Line Stop Cutter

#2

Special Cutter showing the Cut Out Coupon from the 8.0" Pipe Tap.

#3

Setting Line Stop Housing & Plug into place.

#4

This complete 8.0" Line Stop Assembly weighs close to 255 lbs.

#5

With the 8.0" Line Stop Plug set in place and the down stream side drained the customer starts with the demo of old piping.

#6

Customer lowers old piping down. Note the open pipe.

#7

The plug has achieved nearly a 100% seal.

#8

Note the open pipe with the sealed Line Stop Plug. Our plugs can be safely held for an indefinite amount of time.

#9

Customer welds new falnge into place.

#19

The new block valve is installed.

#11

With the new valve bolted in place, CRYOSTOP pulls the Line Stop Plug.

#12

Our tech installs the Line Stop Completion Plug.

#13

Note the Line Stop Completion Plug which has been set into place through our valve.

#14

The Line Stop Completion Plug is now set into place and our valve has been removed from the welded Line Stop Fitting.

#15

With our special Line Stop Equipment we can repeat this 8.0" Line Stop Plug Service at anytime in the future.

#16

Our Line Stop Plugging Process is now complete and the Line Stop Fitting has been capped with a blind flange.